HOME | DD
Kitty-Caesar — WIP - Sennen Rod
Published: 2009-10-12 00:16:01 +0000 UTC; Views: 660; Favourites: 7; Downloads: 3
Redirect to original
Description
Sennen/Millennium Rod from Yu-Gi-Oh!After all the materials were gathered, cut down to size, sanded, attacked with a drill, sculpted, primed, attached, glued.
And before I painted the whole monster. The painting part was, of course, the easiest part.
The rod and circular part of the "head" was made out of wood.
All the white parts are made out of Model Magic (Crayola).
You see the "wings"/"ax" parts? Yeah, those. Yeah they are the devil. >< Each one took me at least an hour to make. *dies* And that was after I figured out how to make them into the size I wanted them (that took an hour unto itself *dies*). So after about 3 hours those two little wings were made and sitting very carefully drying.
Because of those wings, I also learned real quickly how to correctly work with Model Magic. If you treat it like clay and always have a damp paper towel with a huge supply of water then Model Magic is your bi**h. If not then you're screwed and it will never do what you want. D:
The "head" is connected to the rod with a double ended screw (and it took me forever to find the one I needed), and then wood glue was used to double secure it.
A hole was drilled from side to side though the "head" so that I could run a very thin wooden dowel though it so that I could use it as a pin to connect the "wings"/"axes" to the "head." Then the "wings" were super glued to the head to double secure them.
The same was done with the bottom point at the very end of the Rod.
The eye was glued to the "head."
Everything made by me ( )
